Liebherr LTM 1500-8.1
Asiagroup
Here was the Liebherr LTM 1500-8.1 of Asiagroup from Singapore (SG) used by the dismantling of a Jaso J380PA tower crane.
The outrigger base of the crane measures 10 x 9.6 meters, or half 10 x 6.25 meters.
The crane was here fitted with 135 tonnes of counterweight, the counterweight has a 6.6 meter tailswing.
Here is the 4-part main boom extended to a length of 47.3 meters, the main boom is here fitted with a 49 meter luffing jib. The luffing jib has a maximum length of 91 meters.
A sharp crane of Asiagroup!
Here was the Liebherr LTM 1500-8.1 used to dismantle a tower crane. Because the tower crane was erected nearby the airport, this job had to be done at night.
The crane was fitted with a 35 meter lugging jib, the main boom is extended to a length of 42.1 meters.
Here was the climbing tower section of a Potain MCT 565 hoisted.
Here, the impressive Liebherr LTM 1500-8.1 of Asiagroup from Singapore (SG) was used for the dismantling of a Yongmao STT293 tower crane.
The Liebherr LTM 1500-8.1 is configured here with a 70-metre luffing jib. The maximum length of the luffing jib is 91 metres.
The crane was operated here with the full counterweight of 165 tonnes.
The YSL boom suspension arms are each extended at an angle of 42 degrees. The crane was used in the T3YN configuration.
The tower crane had to be dismantled at a large working radius. The main boom was extended to a length of 47.3 metres.
Here, the counter jib of the Yongmao tower crane was lifted off. An impressive operation by Asiagroup!