Sany SR315RC10
Teambuild
This fine Sany SR315RC10 belongs to Teambuild from Singapore (SG). It is a drilling rig built for a maximum torque of 310 kNm, and the year of manufacture is 2018.
The carrier is 7.47 metres long and 4.53 metres wide in working position. For transport on public roads, the width can be reduced to 3.46 metres.
The rig is powered by an Isuzu AH-6WG1X, a 6-cylinder diesel engine with an output of 300 kW (402 hp).
In the leader, a rotary drive is suspended with a maximum torque of 310 kNm at 5 rpm. This rig is primarily deployed for Kelly drilling; the maximum pile diameter is 2.3 metres and the maximum drilling depth is 94 metres.
The leader has a maximum height of 25.4 metres. For transport on public roads, the leader is folded backwards. The upper section of the leader can be folded down to reduce the transport length.
To move the Kelly bar and tool vertically, a 33.5-tonne hoist winch with 36 mm hoist rope is used. The longest Kelly bar without tool weighs 15.9 tonnes.
Here, the machine had not yet started working. Foundation piles had to be drilled for a new metro line.
A fine drilling rig from Teambuild!