Scania 143 M 500 - Hup Hin

This sharp Scania 143 M 500 von Hup Hin from Johor Bahru (MY) stood during an early morning parked in an industrial area in Singapore (SG) with an oversized cargo. The combination exists out of a 3-axle truck with a 7-axle trailer.

The Scania 143 M 500 is powered by a Scania DSC14, a 14-litre 8-cylidner diesel engine with a power of 373 kW (500 hp). This truck has a 6x4-drive line where both rear axles are powered.

On this side are the battery and a couple of compressed-air tanks installed behind the front axle.

The 7-axle trailer has rigid axles only, three of the seven axles are lifted.

On this side are the large diesel tank installed behind the front axle.

This trailer has a maximum allowable mass in Malaysia of 72 tonnes. The self-weight of the trailer is approx. 17 tonnes, 55 tonnes of cargo can be transported with the trailer. The cargo this time won't challange the maximum pay load. Due to the width is the transport only allowed the drive at night.

A very sharp and tough combination of Hup Hin!

Back to the Scania 3-series menu